BPCWT - F-09P18A, TK/G 3 COMP B
- MSDS: BPCWT
- Manufacturer: SEAGRAVE COATINGS CORP OF VA
- Product Name: F-09P18A, TK/G 3 COMP B
- National Stock Number: 8010-00N028535
Product Identification
Product ID:F-09P18A, TK/G 3 COMP B
MSDS Date:11/05/1990
FSC:8010
NIIN:00N028535
Kit Part:Y
MSDS Number: BPCWT
Responsible Party
PORTSMOUTH, VA 23701
US
Emergency Phone: 804-488-4411
Info Phone: 804-488-4411
Cage: 60163
Contractor
Telephone: 757-397-2223
Cage: 60163
Ingredients
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC)
CAS: 14807-96-6
RTECS: WW2700000
Fraction By Weight: <30%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST
NAPHTHA PETROLEUM, HEAVY ALKYLATE C9-C12; (ODORLESS MINERAL
CAS: 64741-65-7
Fraction By Weight: <1%
ACGIH TLV: 100 PPM (MFR)
3 @ 20C.
CAS: 64742-94-5
RTECS: WF3100000
Fraction By Weight: <25%
ACGIH TLV: 100 PPM (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION TO RESPIRATORY
TRACT, HEADACHE, DIZZINESS AND NAUSEA. SKIN: PRIMARY IRRITATION.
EYE: PRIMARY IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SENSITIVITY TO
SOLVENTS CAN CAUSE HEIGHTENED REACTION TO EXPOSURE TO THIS PRODUCT.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR, RESTORE BREATHING. CONSULT
PHYSICIAN. SKIN: FLUSH WITH WATER. EYE: FLUSH IMMEDIATELY WITH
LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. CONSULT PHYSICIAN.
INGESTION: CALL MD IMMEDIATELY .
Fire Fighting
Flash Point Method:TCC
Flash Point:129F,54C
Lower Limits:0.8%
Upper Limits:7.0%
Extinguishing Media:WATER FOG, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.H*2O MAY BE USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILD-UP &
POSS AUTOIGNIT/EXPLO WHEN EXPOS TO (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT, SPARKS, AND OPEN FLAME. CLOSED CONTAINERS MAY EXPLODE
WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:AVOID BREATHING SOLVENT VAPOR. ENSURE ADEQUATE
VENTILATION. AVOID SPARKS, FLAMES, AND ANYTHING WHICH COULD CAUSE
FIRE. SOAK LIQUIDS WITH SAWDUST OR RAGS AND REMOVE. FLUSH WITH
WATER IF POSSIBLE. AVOID SKIN CONTACT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL DRY AREA WITH
VENTILATION SUITABLE FOR STORING MATERIALS SHOWN IN INGREDIENTS
SECTION.
Other Precautions:PROVIDE RESPIRATORY PROTECTION AGAINST FUMES
GENERATED DURING BURNING.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP TYPES SUITABLE FOR
MATERIALS IN INGREDIENTS SECTION RECOM. NIOSH/MSHA APPROVED
CHEM/MECH FILTERS RECOM WHEN VENT IS RESTRICTED. NIOSH/MSHA
APPROVED AIRLINE TYPE RESP OR HOODS RECOMMENDED IN CONFINED AREAS.
Ventilation:SUFF VENT, IN VOL & PATTERN, SHD BE PROVIDED TO KEEP AIR
CONTAMINATION BELOW CURRENT APPLIC OSHA PEL/ACGHI'S TLV LIMIT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE PROTECTIVE CREAMS WHERE SKIN CONTACT IS
LIKELY.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING. SMOKE IN
DESIGNATED AREAS ONLY. REMOVE AND WASH CONTAM CLTHG BEFORE REUSE.
Supplemental Safety and Health
FIRE FIGHT PROC: EXTREME HEAT.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:346F,174C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.2579
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:MILKY BROWN LIQUID, AROMATIC SOLVENT ODOR.
Percent Volatiles by Volume:32.4
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDIZING MATERIALS CAN CAUSE VIGOROUS
REACTION.
Disposal
Waste Disposal Methods:SOAK LIQUIDS WITH SAWDUST OR RAGS AND REMOVE.
FLUSH WITH WATER IF POSSIBLE. AVOID SKIN CONTACT. DISPOSAL SHOULD
BE IN ACCORDANCE WITH LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.